Home > News > Industry > How to switch the print densit.....
Contact us
Address: 3A01, 4F, Block 2, Nanyou 4th Industrial Park, Nanshan Ave, Nanshan, Shenzhen 518054, China.
Email: ocom@ocominc.com, info@possolution.com .cn; 
Tel: +86.755.86053207, ext. 800; 
Fax: +86.755.86053207 ext. 868; 
QQ: 2485890637; 
WeChat / WHATSAPP / Viber: 0086-13352932860.Contact Now
Customer Comment


    How to switch the print density thermal printer

    • Author:Hans
    • Source:Original
    • Release on :2015-01-09
                                     How to switch the print density thermal printer

    58mm thermal printer, 80mm thermal printer with auto-cutter, Chinese thermal printer manufacturers

        If you purchased  OCOM 58mm thermal printer, Then in the off state, hold down the feed button and hold, turn on the printer, the printer for about 8 seconds after lights went out, when the lights again, release feed button, you can switch the concentration of the printer.
        If you are buying OCOM 80mm thermal printer, Then open the lid at the bottom of the printer, you can see a row of DIP switches, then please toggle third DIP switches you can adjust the print density.